Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Air Filter on a Chrysler 200

Model: Chrysler 200 MK 2 - Years: 2015, 2016, 2017
Part: Air filter

See other generations:
Video tutorial

To replace the air filter - or pollen filter - on the Chrysler 200, locate it behind the glove compartment, which needs to be emptied and partially disassembled by lowering it to see the back. You will find a small rectangular compartment with a cover.

Remove it by releasing the clips on the sides, and you can take out the dirty filter. Clean the compartment where the new filter will go, and remember to install it in the correct orientation, with the arrows pointing up. Reattach the cover and snap the glove compartment back into place.

The job is complete.


Updated on 4 June 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Filter on a Chrysler 200
How to Replace the Cabin Filter on a Chrysler 200
Chrysler 200 (2015-2017 / MK 2) To replace the cabin filter on a Chrysler 200, completely remove the panel located on the left side of the footwell. Once this panel is removed, you …
How to Replace the Cabin Filter on a Chrysler 200.
How to Replace the Cabin Filter on a Chrysler 200.
Chrysler 200 (2011-2014 / MK 1) In this video tutorial, you can see how to replace the cabin filter on a Chrysler 200 by following a few simple steps: the first thing to do is to pu…
How to Replace the Cabin Filter in a Chrysler 200?
How to Replace the Cabin Filter in a Chrysler 200?
Chrysler 200 (2015-2017 / MK 2) To replace the cabin filter in a Chrysler 200, remove the plastic panel on the left side of the footwell on the passenger side. Once this panel is re…

Other guides you may be interested in

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos