Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Air Filter of the Chrysler 200

Model: Chrysler 200 MK 2 - Years 2015-2017
Part: Cabin air filter

Here’s how to easily replace the cabin air filter of the Chrysler 200: access it from the glove compartment, which can be easily removed by pressing it. Once the glove compartment is out, you will see an access cover for the filter. This is also held in place by pressure, so just press to release it. Remove the used filter from its housing, and clean the housing with a blast of compressed air to remove accumulated dirt. Insert the new filter, making sure the arrows point downward. Close the access cover and reinstall the glove compartment. The job is complete.

Updated on 5 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Air Filter on a Chrysler 200
How to Replace the Cabin Air Filter on a Chrysler 200
Chrysler 200 (2011-2014 / MK 1) If you want to replace the cabin air filter in your 2014 Chrysler 200 yourself, follow the steps in this guide. First, park your Chrysler 200 safely …
How to Replace the Cabin Air Filter on a Chrysler 200
How to Replace the Cabin Air Filter on a Chrysler 200
Chrysler 200 (2015-2017 / MK 2) To replace the air filter - or pollen filter - on the Chrysler 200, locate it behind the glove compartment, which needs to be emptied and partially d…
How to Replace the Air Filter on a Chrysler 200.
How to Replace the Air Filter on a Chrysler 200.
Chrysler 200 (2015-2017 / MK 2) In this video tutorial, you can see how to replace the air filter on a Chrysler 200 by following a few simple steps: the first thing to do is to purc…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos