Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

Replacing the cabin air filter on a Chrysler PT Cruiser.

Model: Chrysler Pt Cruiser MK 1 - Years 2000-2010
Part: Air filter

To replace the cabin filter on a Chrysler PT Cruiser, we need to follow a few simple steps: the first thing to do is to purchase a new pollen filter; the next step is to get into the car and turn off the engine and pull the handbrake. The pollen filter on this car is located inside the engine compartment, so we need to lift the hood and secure it with a special rod; remove the rubber and unscrew the 4 screws to remove the ventilation cover; to access the filter we need to remove the tank, so we need to unscrew the three screws. Now we can remove the old filter and position the new filter.


Posted on 24 June 2023 by ScegliAuto



Replacement of the cabin air filter
Chrysler Pt Cruiser (2000-2010 / MK 1) If you want to replace the cabin air filter of a Chrysler Pt Cruiser without going to the workshop, this video may help you. Open the bonnet hatch. U
What is the fuse layout of the Chrysler PT Cruiser?
Chrysler Pt Cruiser (2000-2010 / MK 1) If some devices of our Chrysler PT Cruiser have suddenly stopped working, we can first of all check the status of the corresponding fuses whose schem
Where are the fuses located in the Chrysler PT Cruiser?
Chrysler Pt Cruiser (2000-2010 / MK 1) The fuses of the Chrysler PT Cruiser are located inside the only fuse box located in the engine compartment: this will be found on the right side of

Other guides that may interest you

How to remove the telepass holder from the windshield

Today we will explain how to remove the telepass holder from a vehicle's windshield. Removing the telepass holder from the windshield is a very simple and quick operation to perform independently, you just need to use nylon thread that you will need to pull towards the holder and pass it between the holder and the clip. After performing this operation, the holder will be removed. There may be glue residues on the windshield that can be removed with a solvent suitable for glass cleaning. After cleaning everything, it is possible to mount another telepass holder on the windshield in the same position as the one removed or elsewhere.

Watch the video!


by ScegliAuto

More videos