Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Chrysler Voyager: How to Replace the Oil Filter

Model: Chrysler Voyager MK 4 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Oil filter

See other generations:
Video tutorial

Lift the vehicle with a suitable jack, remove the lower engine cover, and locate the oil filter. Unscrew the large container where the oil filter is situated, and extract the worn oil filter.

Unscrew the drain plug from the sump: allow the oil to drain into a container. Screw in the new engine oil filter.

Lower the car to the ground and lift the bonnet to top up with new oil. Add new oil to the engine until the optimal level is reached.


Updated on 2 April 2026 by ScegliAuto


Related tutorials

Where are the Fuses on a Chrysler Voyager?
Where are the Fuses on a Chrysler Voyager?
Chrysler Voyager (2020-2026 / MK 6) The fuses on a Chrysler Voyager are located inside the dedicated fuse box installed in the vehicle: this model has only one fuse box. It can be found…
Where are the fuses located in the Chrysler Voyager?
Where are the fuses located in the Chrysler Voyager?
Chrysler Voyager (2020-2026 / MK 6) Any fuse in the Chrysler Voyager is located inside the only fuse box present in the vehicle: in this type of vehicle, you can find it inside the engi…
Where are the Fuses Located on a Chrysler Voyager?
Where are the Fuses Located on a Chrysler Voyager?
Chrysler Voyager (2000-2007 / MK 4) The fuse boxes on the Chrysler Voyager contain the fuses that regulate the operation of the devices installed on the vehicle: there is a single fuse …

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos