Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where are the fuses located in the Chrysler Voyager?

Model: Chrysler Voyager MK 6 - Years 2020-2026
Part: Fuse box

Any fuse in the Chrysler Voyager is located inside the only fuse box present in the vehicle: in this type of vehicle, you can find it inside the engine compartment. You will locate it by opening the bonnet, at the top right of the compartment just below the windscreen: here you will find the fuses that control the operation of the windscreen wipers, the fuel pump, the cabin fan, etc. Any fuse among those present can be replaced with a new one of the same amperage.

Updated on 16 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Where to Find the Fuses of the Chrysler Voyager 2020
Where to Find the Fuses of the Chrysler Voyager 2020
Chrysler Voyager (2020-2026 / MK 6) If you're wondering where all the various fuses are located inside your Chrysler Voyager Mk6 (2020), read this guide carefully and follow the describ…
Where are the Fuses Located on a Chrysler Voyager?
Where are the Fuses Located on a Chrysler Voyager?
Chrysler Voyager (2000-2007 / MK 4) The fuse boxes on the Chrysler Voyager contain the fuses that regulate the operation of the devices installed on the vehicle: there is a single fuse …
Where are the Fuses Located in the Chrysler Voyager?
Where are the Fuses Located in the Chrysler Voyager?
Chrysler Voyager (2020-2026 / MK 6) In the Chrysler Voyager, the fuses are located in the designated fuse box present in the vehicle. In this type of vehicle, you can find the box on th…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos