Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the fuel pump in the Chrysler 300?

Model: Chrysler 300c MK 1 - Years 2004-2011
Part: Fuel pump

In this tutorial, you will see how to replace the fuel pump in the Chrysler 300, a very simple and quick operation. Before proceeding, disconnect the negative terminal of the battery to work safely. Start by opening the rear doors, then lift the seat cushion upwards and free it. Next, remove the cap on the left side, disconnect the power connector, and, if necessary, using a hammer and chisel, unscrew the large outer ring. At this point, simply extract the pump, insert the replacement, and reassemble everything.

Updated on 31 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the oil light on the Chrysler 300
How to reset the oil light on the Chrysler 300
Chrysler 300c (2011-2023 / MK 2, LD) If you own a second series Chrysler 300 and want to find out the steps you need to take to complete the manual reset procedure of the engine oil ligh…
How to Replace the Key Battery on the New Chrysler 300
How to Replace the Key Battery on the New Chrysler 300
Chrysler 300c (2011-2023 / MK 2, LD) If you own the brand new Chrysler 300 and want to learn how to correctly replace the button battery in the smart key, carefully read the following gu…
How to Replace the Gear Knob on a Chrysler 300
How to Replace the Gear Knob on a Chrysler 300
Chrysler 300c (2004-2011 / MK 1) To replace the gear knob on a Chrysler 300, use a tool to pry off the chrome ring at the base of the knob. Once removed, you can detach the clip loca…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos