Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fuel Pump in a Chrysler PT Cruiser

Model: Chrysler Pt Cruiser MK 1 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Fuel pump

Video tutorial

Before you can start, open the fuel cap of your Chrysler PT Cruiser, then disconnect the battery to work safely. Begin by lifting the rear of the vehicle.

Next, you will need to disassemble and remove the fuel tank by disconnecting the relevant hoses, unscrewing and removing the fixing bolts, and disconnecting the various electrical connectors. Once done, you will need to prise off and remove the fuel pump cover.

Proceed by disconnecting the various hoses and electrical connectors attached to it, then unscrew the relevant retaining ring. By doing this, you will have freed the fuel pump.

At this point, you can extract the fuel pump from the tank, completing the disassembly. To install the new fuel pump, simply follow this procedure in reverse, and you will have completed the replacement.


Updated on 13 April 2026 by ScegliAuto


Related tutorials

Where Are the Fuses on a Chrysler PT Cruiser?
Where Are the Fuses on a Chrysler PT Cruiser?
Chrysler Pt Cruiser (2000-2010 / MK 1) The fuses on a Chrysler PT Cruiser are contained within the corresponding fuse boxes designed to hold them: on this type of vehicle, there will be a …
How to replace the radiator in a Chrysler PT Cruiser?
How to replace the radiator in a Chrysler PT Cruiser?
Chrysler Pt Cruiser (2000-2010 / MK 1) In this tutorial, you will see how to replace the radiator in a Chrysler PT Cruiser, a simple task but one that requires good manual skills. First, e…
How to Replace the Timing Belt on a Chrysler PT Cruiser?
How to Replace the Timing Belt on a Chrysler PT Cruiser?
Chrysler Pt Cruiser (2000-2010 / MK 1) To replace the timing belt on a Chrysler PT Cruiser, open the bonnet to remove the plastic cover on the left side of the engine bay. Once this cover …

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos