Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the fuel pump in the Chrysler 200?

Model: Chrysler 200 MK 1 - Years 2011-2014
Part: Fuel pump

In this tutorial we can see how to replace the fuel pump in the Chrysler 200, an extremely simple and fast operation. Before proceeding, let's open the hood and disconnect the negative terminal of the battery, in order to work in complete safety. Let's start by opening the rear doors, then grab the seat of the sofa, pull it towards us and separate it from the base. Next, remove the circular cap, disconnect both the tubes and the power connector, and unscrew the large outer ring. At this point, all that remains is to remove the pump from the tank and install the replacement if necessary.

Posted on 12 November 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the cabin filter of the Chrysler 200?
How do you replace the cabin filter of the Chrysler 200?
Chrysler 200 (2015-2017 / MK 2) In order to replace the cabin filter of the Chrysler 200, you need to completely detach the panel located on the left side of the footwell: once this…
How to replace the license plate light of the Chrysler 200
How to replace the license plate light of the Chrysler 200
Chrysler 200 (2015-2017 / MK 2) If you own a second-generation Chrysler 200 and are experiencing issues with the license plate light, don't worry because thanks to the procedure des…
How to replace the battery of the Chrysler 200 key.
How to replace the battery of the Chrysler 200 key.
Chrysler 200 (2011-2014 / MK 1) In the following guide, we will explain how you can replace the battery in the key of your first edition Chrysler 200 on your own. First of all, make…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos