Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Fold the "Stow'n Go" Rear Seat on Chrysler Voyager

Model: Chrysler Voyager MK 6 - Years 2020-2026
Part: Seat

In this video, we can see how to fold the "Stow'n Go" rear seat of the Chrysler Voyager: it is a truly ingenious system for folding the rear seats into the floor, creating a flat loading area, providing extra space without removing the seats, and then returning to passenger configuration in seconds: lower the headrest by pulling the central lever, press the button, and push down (do this on both sides). The straps are numbered, so just follow the order: pull strap number 1 and the seat begins to fold; pulling number 2 lowers the seat completely into the floor. To raise them, pull strap 2 to lift the seat and push down until you hear the "click", then place the seat back in its original position.

Posted on 30 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Airbag Warning Light on a Chrysler Voyager?
How to Reset the Airbag Warning Light on a Chrysler Voyager?
Chrysler Voyager (2000-2007 / MK 4) This guide shows how to reset the airbag warning light on a 2002 Chrysler Voyager. The first operation to perform, if you have a scanner, is to diagn…
How to replace the cabin air filter of the Chrysler Voyager
How to replace the cabin air filter of the Chrysler Voyager
Chrysler Voyager (2020-2026 / MK 6) Today's instructions will show us the process of disassembling and replacing the cabin air filter of the Chrysler Voyager. First, we get on board the…
How to Replace the Front Light of the Chrysler Voyager
How to Replace the Front Light of the Chrysler Voyager
Chrysler Voyager (2000-2007 / MK 4) Here are the instructions to remove and replace the front light of the Chrysler Voyager. First, open the bonnet of the vehicle and start unscrewing t…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos