Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Airbag Warning Light on a Chrysler Voyager?

Model: Chrysler Voyager MK 4 - Years 2000-2007
Part: Warning light – error code

This guide shows how to reset the airbag warning light on a 2002 Chrysler Voyager. The first operation to perform, if you have a scanner, is to diagnose the vehicle; this way, you will easily identify the fault. Often, the damage concerns the connectors linked to the seat. First, check the connection on the seat by cleaning the contact and repositioning it, then perform the same operation with the connector under the seat. The airbag circuit is yellow. If the connectors are in poor condition, it is advisable to replace them with new ones; pay attention to how the wires are reconnected. By turning on the ignition, you can check the success of the operation.

Updated on 17 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Light on a Chrysler Voyager
How to Reset the Oil Light on a Chrysler Voyager
Chrysler Voyager (2020-2026 / MK 6) Follow this brief tutorial to reset the engine oil maintenance light on a sixth-generation Chrysler Voyager. First, briefly press the vehicle's start…
How to replace the battery of the Chrysler Voyager remote control
How to replace the battery of the Chrysler Voyager remote control
Chrysler Voyager (2020-2026 / MK 6) The Chrysler Voyager's remote control stopped working due to the battery not functioning, so it is necessary to open the remote control and proceed w…
Where are the fuses located in the Chrysler Voyager?
Where are the fuses located in the Chrysler Voyager?
Chrysler Voyager (2020-2026 / MK 6) The fuses of the Chrysler Voyager are contained inside the appropriate fuse box that is installed on the vehicle: in this car model, only one box can…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos