Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Light on a Chrysler Voyager

Model: Chrysler Voyager MK 6 - Years 2020-2026
Part: Service warning light

Follow this brief tutorial to reset the engine oil maintenance light on a sixth-generation Chrysler Voyager. First, briefly press the vehicle's start button twice to turn on the injection system without starting the engine. Within five seconds of turning on the injection, press the accelerator pedal fully down three times. Once done, turn off the vehicle and then start it to verify the oil maintenance light has been reset.

Updated on 24 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Air Filter of a Chrysler Voyager
How to Replace the Cabin Air Filter of a Chrysler Voyager
Chrysler Voyager (2000-2007 / MK 4) Before you can start, open the front passenger door of your Chrysler Voyager. The cabin air filter is located beneath the glove compartment. First, u…
Chrysler Voyager: How to Replace the Oil Filter
Chrysler Voyager: How to Replace the Oil Filter
Chrysler Voyager (2000-2007 / MK 4) Lift the vehicle with a suitable jack, remove the lower engine cover, and locate the oil filter. Unscrew the large container where the oil filter is …
Resetting the service light on the Chrysler Voyager.
Resetting the service light on the Chrysler Voyager.
Chrysler Voyager (2020-2026 / MK 6) When it's time to change the oil of the Chrysler Voyager, a message appears on the instrument panel reminding us of the need for replacement. After c…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos