Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Service Light on the Chrysler Voyager

Model: Chrysler Voyager MK 6 - Years: 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Service warning light

See other generations:
Video tutorial

When it's time to change the oil on the Chrysler Voyager, a message appears on the instrument display reminding you of the need for replacement. After completing the necessary operations, proceed to reset the control system.

Sit in the driver's seat and turn on the instrumentation, then press the accelerator pedal fully three times. Alternatively, with the instrument panel still on, select "oil duration" on the central display and press the "ok" button for a few seconds to perform the reset.

After the next restart, the warning message will not appear.


Updated on 17 October 2026 by ScegliAuto


Related tutorials

How to Reset the Oil Light on a Chrysler Voyager
How to Reset the Oil Light on a Chrysler Voyager
Chrysler Voyager (2020-2026 / MK 6) Follow this brief tutorial to reset the engine oil maintenance light on a sixth-generation Chrysler Voyager. First, briefly press the vehicle's start…
Where are the Fuses on a Chrysler Voyager?
Where are the Fuses on a Chrysler Voyager?
Chrysler Voyager (2020-2026 / MK 6) The fuses on a Chrysler Voyager are located inside the dedicated fuse box installed in the vehicle: this model has only one fuse box. It can be found…
How to Remove the Diesel Filter on a Chrysler Voyager
How to Remove the Diesel Filter on a Chrysler Voyager
Chrysler Voyager (2000-2007 / MK 4) Lift the car on a column lift and locate the diesel filter as shown in the video. Use a socket spanner to unscrew the securing bolt above the contain…

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos