Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Diesel Filter on a Chrysler Voyager

Model: Chrysler Voyager MK 4 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Diesel fuel filter

See other generations:
Video tutorial

Lift the car on a column lift and locate the diesel filter as shown in the video. Use a socket spanner to unscrew the securing bolt above the container (disconnect the cables and various hoses from the filter) where the diesel filter is situated.

Once the filter is removed, take it out of the vehicle (replace it with a new filter). Finally, refit the filter to the associated diesel filter container (connect the hoses and cables) and tighten the appropriate bolts.

Close the bonnet after maintenance.


Updated on 7 March 2026 by ScegliAuto


Related tutorials

How to Remove the Diesel Filter from a Chrysler Voyager
How to Remove the Diesel Filter from a Chrysler Voyager
Chrysler Voyager (2000-2007 / MK 4) Learn how to remove the diesel filter fitted on a Chrysler Voyager. Lift the front bonnet; locate the diesel filter (as shown in the video) and unscr…
How to Replace the Cabin Air Filter of a Chrysler Voyager
How to Replace the Cabin Air Filter of a Chrysler Voyager
Chrysler Voyager (2000-2007 / MK 4) Before you can start, open the front passenger door of your Chrysler Voyager. The cabin air filter is located beneath the glove compartment. First, u…
How to Replace the Pollen Filter on a Chrysler Voyager
How to Replace the Pollen Filter on a Chrysler Voyager
Chrysler Voyager (2000-2007 / MK 4) How to replace the pollen filter on a Chrysler Voyager? Follow these steps: use a plastic lever to detach the plastic cover located at the bottom of …

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos