Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Diesel Filter from a Chrysler Voyager

Model: Chrysler Voyager MK 4 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Diesel fuel filter

See other generations:
Video tutorial

Learn how to remove the diesel filter fitted on a Chrysler Voyager. Lift the front bonnet; locate the diesel filter (as shown in the video) and unscrew the bolt securing the container where the diesel filter is located using a large screwdriver (you can also use a socket wrench).

Once the filter is removed, take it out of the vehicle (replace it with a new filter). Finally, refit the new filter into the associated diesel filter container (connect hoses and cables) and tighten the appropriate bolts.

Close the front bonnet after assembly.


Updated on 12 March 2026 by ScegliAuto


Related tutorials

How to Remove the Diesel Filter on a Chrysler Voyager
How to Remove the Diesel Filter on a Chrysler Voyager
Chrysler Voyager (2000-2007 / MK 4) Lift the car on a column lift and locate the diesel filter as shown in the video. Use a socket spanner to unscrew the securing bolt above the contain…
How to Replace the Cabin Air Filter of a Chrysler Voyager
How to Replace the Cabin Air Filter of a Chrysler Voyager
Chrysler Voyager (2000-2007 / MK 4) Before you can start, open the front passenger door of your Chrysler Voyager. The cabin air filter is located beneath the glove compartment. First, u…
Chrysler Voyager: How to Replace the Oil Filter
Chrysler Voyager: How to Replace the Oil Filter
Chrysler Voyager (2000-2007 / MK 4) Lift the vehicle with a suitable jack, remove the lower engine cover, and locate the oil filter. Unscrew the large container where the oil filter is …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos