Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Air Filter of a Chrysler Voyager

Model: Chrysler Voyager MK 4 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Cabin air filter

See other generations:
Video tutorial

Before you can start, open the front passenger door of your Chrysler Voyager. The cabin air filter is located beneath the glove compartment.

First, unclip and remove the lower cover of the cabin air filter. This will give you access to the filter itself.

At this point, extract the cabin air filter from its housing, and you will have completed the disassembly. To install the new cabin air filter, simply follow these steps in reverse, and the replacement will be finished.


Updated on 10 April 2026 by ScegliAuto


Related tutorials

Replacing the Pollen Filter on a Chrysler Voyager
Replacing the Pollen Filter on a Chrysler Voyager
Chrysler Voyager (2000-2007 / MK 4) On the Chrysler Voyager, the cabin air filter, or pollen filter, is located under the glove compartment. To access it, pull the filter box cover to t…
Chrysler Voyager: How to Replace the Oil Filter
Chrysler Voyager: How to Replace the Oil Filter
Chrysler Voyager (2000-2007 / MK 4) Lift the vehicle with a suitable jack, remove the lower engine cover, and locate the oil filter. Unscrew the large container where the oil filter is …
How to Replace the Pollen Filter on a Chrysler Voyager
How to Replace the Pollen Filter on a Chrysler Voyager
Chrysler Voyager (2000-2007 / MK 4) How to replace the pollen filter on a Chrysler Voyager? Follow these steps: use a plastic lever to detach the plastic cover located at the bottom of …

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos