Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Pollen Filter on a Chrysler Voyager

Model: Chrysler Voyager MK 4 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Cabin air filter

See other generations:
Video tutorial

On the Chrysler Voyager, the cabin air filter, or pollen filter, is located under the glove compartment. To access it, pull the filter box cover to the left, as shown in the video, unfastening it so you can remove it. At this point, simply extract the old filter from its housing.

Purchase a filter with the same code as the original and, while you're at it, clean the inside of the filter box. Insert the new filter once done, then reattach the glove compartment cover, and you're finished. As you can see, this is a task within everyone's reach.


Updated on 20 April 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Filter on a Chrysler Voyager
How to Replace the Cabin Filter on a Chrysler Voyager
Chrysler Voyager (2000-2007 / MK 4) To replace the pollen filter on a Chrysler Voyager: use a plastic lever to detach the cover located at the bottom of the dashboard (right side under …
How to Replace the Cabin Air Filter of a Chrysler Voyager
How to Replace the Cabin Air Filter of a Chrysler Voyager
Chrysler Voyager (2000-2007 / MK 4) Before you can start, open the front passenger door of your Chrysler Voyager. The cabin air filter is located beneath the glove compartment. First, u…
How to Replace the Cabin Air Filter of the Chrysler Voyager
How to Replace the Cabin Air Filter of the Chrysler Voyager
Chrysler Voyager (2020-2026 / MK 6) Today's instructions will show you the procedure for removing and replacing the cabin air filter of the Chrysler Voyager. First, get inside the vehic…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos