Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Locating the Fuse Box on the Chrysler Voyager MK3

Model: Chrysler Voyager MK 3 - Years: 1995, 1996, 1997, 1998, 1999, 2000
Part: Fuse box

See other generations:
Video tutorial

In this video, we will see the location and list of fuses found on the Chrysler Voyager version 1996/2001. The first fuse box is located in the cabin, under the dashboard on the driver's side. The second box is positioned in the engine compartment, located on the right side of the battery, directly in front of the driver.

Nearby, there is also a small rectangular box containing the relays. The fuse for the cigarette lighter - which is also for the power socket - is located in the cabin fuse box and is #F19, which also controls the front and rear washer module, rear washer motor, and the front wiper switch.


Updated on 2 September 2026 by ScegliAuto


Related tutorials

Electrical diagram and position of the fuse boxes of the Chrysler Town & Country.
Electrical diagram and position of the fuse boxes of the Chrysler Town & Country.
Chrysler Voyager (2000-2007 / MK 4) In this video, we can see the electrical diagram of the Chrysler Town and Country, known in Europe as the Voyager: below we also indicate the positio…
Fuse Location and Diagram on Chrysler Voyager
Chrysler Voyager (2000-2007 / MK 4) Here is the fuse diagram for the Chrysler Voyager produced from 2000 to 2007. On this vehicle, unlike many other car models, there is only one fuse b…
Where to Find the Fuse Boxes and Their Diagram on the Chrysler Voyager
Where to Find the Fuse Boxes and Their Diagram on the Chrysler Voyager
Chrysler Voyager (2000-2007 / MK 4) Today, we will see in this short and simple guide where to find the fuse boxes and how to obtain the diagram for the Chrysler Voyager. First, get in …

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos