Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fuse Location and Diagram on Chrysler Voyager

Model: Chrysler Voyager MK 4 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Fuse box

See other generations:
This video is currently unavailable

Here is the fuse diagram for the Chrysler Voyager produced from 2000 to 2007. On this vehicle, unlike many other car models, there is only one fuse box, lacking the one inside the cabin. All fuses are contained within the box located under the bonnet, on the far left side of the vehicle (driver's side, so to your right when you have lifted the bonnet and are facing the cabin).

As shown in the table, fuse number 4 at 30 Amperes is for the front wipers, while number 9 at 40 Amperes is for the ABS, and so on.


Updated on 17 April 2026 by ScegliAuto


Related tutorials

Electrical diagram and position of the fuse boxes of the Chrysler Town & Country.
Electrical diagram and position of the fuse boxes of the Chrysler Town & Country.
Chrysler Voyager (2000-2007 / MK 4) In this video, we can see the electrical diagram of the Chrysler Town and Country, known in Europe as the Voyager: below we also indicate the positio…
Where to Find the Fuse Boxes and Their Diagram on the Chrysler Voyager
Where to Find the Fuse Boxes and Their Diagram on the Chrysler Voyager
Chrysler Voyager (2000-2007 / MK 4) Today, we will see in this short and simple guide where to find the fuse boxes and how to obtain the diagram for the Chrysler Voyager. First, get in …
Locating the Fuse Box on the Chrysler Voyager MK3
Locating the Fuse Box on the Chrysler Voyager MK3
Chrysler Voyager (1995-2000 / MK 3) In this video, we will see the location and list of fuses found on the Chrysler Voyager version 1996/2001. The first fuse box is located in the cabin…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos