Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Locate the Fuse Boxes in a Chrysler Voyager

Model: Chrysler Voyager MK 6 - Years 2020-2026
Part: Fuse box

In a Chrysler Voyager, the fuse boxes are located in two positions. The first and most important is in the engine compartment, near the battery, and is called the Power Distribution Center (PDC). To access it, open the front bonnet, locate the black plastic container on the engine side near the battery, and remove the cover by disengaging the tabs or clips holding it. The second box is located inside the cabin, usually on the driver's side, under the dashboard or near the glove compartment. To reach it, remove the plastic cover or access panel, behind which are the fuses that manage interior lights, infotainment systems, and other secondary electrical components.

Posted on 27 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Where are the Fuses Located on a Chrysler Voyager?
Where are the Fuses Located on a Chrysler Voyager?
Chrysler Voyager (2000-2007 / MK 4) The fuse boxes on the Chrysler Voyager contain the fuses that regulate the operation of the devices installed on the vehicle: there is a single fuse …
Where to Find the Fuse Boxes and Their Diagram on the Chrysler Voyager
Where to Find the Fuse Boxes and Their Diagram on the Chrysler Voyager
Chrysler Voyager (2000-2007 / MK 4) Today, we will see in this short and simple guide where to find the fuse boxes and how to obtain the diagram for the Chrysler Voyager. First, get in …
Where are the fuses located in the Chrysler Voyager?
Where are the fuses located in the Chrysler Voyager?
Chrysler Voyager (2020-2026 / MK 6) The fuse boxes of the Chrysler Voyager are responsible for containing the fuses that manage the operation of the devices installed on the car: in thi…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos