Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Chrysler
  4. :
  5. Voyager
  6. : Where are the fuses located in the Chrysler Voyager?

Chrysler Voyager - Video tutorial

Model: Chrysler Voyager MK 6 - Years 2020-2024
Part: Fuse box
Operation: Where are the fuses located in the Chrysler Voyager?

Inside the Chrysler Voyager, the fuses are located in the appropriate fuse box that is present in the vehicle: in this type of vehicle, it is possible to locate the box on the right side of the engine compartment. To access it, it will be necessary to open the hood and remove the cover that protects the box: here, the fuses that regulate the operation of the front lights, fuel pump, windshield wipers, etc., can be identified. Each fuse present here can be replaced with a new one that has the same amperage if necessary.


Posted on 1 December 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Chrysler Voyager 2008-2016 - Where is the air conditioning fuse located on Chrysler Voyager? Read Answer
    • Chrysler Voyager 2000-2007 - Where is the Chrysler Voyager horn fuse located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos