Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chrysler
    3. :
  3. Pt Cruiser
    4. : Removing and replacing the radiator fan

Chrysler Pt Cruiser - Video tutorial

Model: Chrysler Pt Cruiser MK 1 - Years 2000-2010
Part: Radiator
Operation: Removing and replacing the radiator fan

This video shows us how to remove and replace the fan of our radiator. First we remove the rubber strip where the engine hood rests, then we disconnect the fan connector and continue to remove some screws. Then we unscrew all the screws that anchor the mask and remove it; finally, the piece of sheet metal where the hook is located to close the bonnet must also be removed, as it hinders the removal of the fan. Once this is done, we can disconnect the radiator hose and unscrew all the screws that support the fan to the radiator so that it can be extracted without problems.


Posted on 29 July 2023 by ScegliAuto

    Frequently Asked Questions

    • Pt Cruiser 2000-2010 - Why won't my PT Cruiser radiator fan turn off? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos