Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Radiator from a Chrysler PT Cruiser

Model: Chrysler Pt Cruiser MK 1 - Years 2000-2010
Part: Radiator

How to remove the radiator from a Chrysler PT Cruiser.
Open the bonnet and secure it; using a suitable socket spanner, remove the plate that secures the door release lever. Remove the plates that hold the radiator at the top, then lift the car on a column lift and unscrew the tightening tap of the water hose. Disconnect the various coolant hoses using pliers. Once free from screws and hoses, you can extract the fan assembly and then the radiator from the engine bay. Prepare to fit the new part in the engine bay, then install the cooling fans, clamps, pins, and various hoses.

Updated on 11 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the radiator in the Chrysler PT Cruiser?
How to replace the radiator in the Chrysler PT Cruiser?
Chrysler Pt Cruiser (2000-2010 / MK 1) In this tutorial we can see how to replace the radiator in the Chrysler PT Cruiser, a simple operation but that requires good manual skills. First of…
How to Remove the Cooling Radiator on a Chrysler PT Cruiser
How to Remove the Cooling Radiator on a Chrysler PT Cruiser
Chrysler Pt Cruiser (2000-2010 / MK 1) Learn how to remove the cooling radiator on a Chrysler PT Cruiser. Open the bonnet, remove the front bumper (if necessary for radiator removal) using…
How to remove the car radio from the Chrysler PT Cruiser
How to remove the car radio from the Chrysler PT Cruiser
Chrysler Pt Cruiser (2000-2010 / MK 1) In this short guide, we will see the instructions that will allow us to disassemble and replace the factory radio of the Chrysler PT Cruiser. First, …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos