Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

Throttle body removal instructions

Model: Chrysler Pt Cruiser MK 1 - Years 2000-2010
Part: Throttle body

If the engine struggles to keep idle or gaps appear during acceleration, it could be a malfunction of the throttle body and the solution to the problem could require a simple cleaning of the throttle body itself; to be able to disassemble it, start by disconnecting the sleeve that connects it to the engine air filter box; remove the plastic cover on the throttle cable, unhook the cable and remove the cable support bracket; then disconnect the sockets and complete the disassembly by unscrewing the relative fixing pins.


Posted on 28 August 2023 by ScegliAuto



Replacing the tappet cover gasket
Chrysler Pt Cruiser (2000-2010 / MK 1) In order to replace the tappet cover gasket (we mean the camshaft cover) it is first necessary to remove the intake manifold; start by disconnecting
Ignition coil disassembly instructions
Chrysler Pt Cruiser (2000-2010 / MK 1) The ignition coil is located just below the intake manifold and to be able to disassemble it you must first remove the manifold itself: start by disc
Spark plug replacement instructions
Chrysler Pt Cruiser (2000-2010 / MK 1) To replace the spark plugs, it is advisable to work with the engine cold to avoid unpleasant burns; once the front hood is open, remove the intake sl

Other guides that may interest you

How to remove the telepass holder from the windshield

Today we will explain how to remove the telepass holder from a vehicle's windshield. Removing the telepass holder from the windshield is a very simple and quick operation to perform independently, you just need to use nylon thread that you will need to pull towards the holder and pass it between the holder and the clip. After performing this operation, the holder will be removed. There may be glue residues on the windshield that can be removed with a solvent suitable for glass cleaning. After cleaning everything, it is possible to mount another telepass holder on the windshield in the same position as the one removed or elsewhere.

Watch the video!


by ScegliAuto

More videos