Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear hatch seal of the Chrysler PT Cruiser

Model: Chrysler Pt Cruiser MK 1 - Years 2000-2010

Today's instructions will show us how to disassemble and replace the seal of the rear trunk door of the Chrysler PT Cruiser. First, we open the trunk door and start removing the old seal on the sides of the trunk body; then we clean the area with specific degreasing products. Next, we install the new seal, of the correct type, fixing it properly on the sides; all that's left is to ensure the correct closing of the rear door and the seal of the new seal, following the video tutorial until the end!

Posted on 20 May 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Key Battery on a Chrysler PT Cruiser
How to Replace the Key Battery on a Chrysler PT Cruiser
Chrysler Pt Cruiser (2000-2010 / MK 1) The smart key for your Chrysler PT Cruiser has a very minimalist and simple external and internal structure. This greatly facilitates its disassembly…
How to remove the car radio from the Chrysler PT Cruiser
How to remove the car radio from the Chrysler PT Cruiser
Chrysler Pt Cruiser (2000-2010 / MK 1) In this short guide, we will see the instructions that will allow us to disassemble and replace the factory radio of the Chrysler PT Cruiser. First, …
How to replace the radiator in the Chrysler PT Cruiser?
How to replace the radiator in the Chrysler PT Cruiser?
Chrysler Pt Cruiser (2000-2010 / MK 1) In this tutorial we can see how to replace the radiator in the Chrysler PT Cruiser, a simple operation but that requires good manual skills. First of…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos