Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the car radio from the Chrysler PT Cruiser

Model: Chrysler Pt Cruiser MK 1 - Years 2000-2010
Part: Car stereo

In this short guide, we will see the instructions that will allow us to disassemble and replace the factory radio of the Chrysler PT Cruiser. First, get into the car and start removing all the knobs of the air conditioning controls; then pry off the plastic side panel of the dashboard, as shown in the video. At this point, it will be possible to remove the radio by unscrewing the four fixing screws on the sides; disconnect the wiring found at the back to remove and replace the radio, then reassemble everything!

Posted on 11 August 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Find and Enter the Radio Code for a Chrysler PT Cruiser
How to Find and Enter the Radio Code for a Chrysler PT Cruiser
Chrysler Pt Cruiser (2000-2010 / MK 1) In this video tutorial, you will see useful instructions for unlocking the radio of a Chrysler PT Cruiser in simple and quick steps. First, get insid…
How to Find the Radio Code in a Chrysler PT Cruiser?
How to Find the Radio Code in a Chrysler PT Cruiser?
Chrysler Pt Cruiser (2000-2010 / MK 1) You may encounter issues with your radio, such as it being locked or not having the code to unlock it. Often, simple operations are required to quick…
Removing the Water Pump from a Chrysler PT Cruiser
Chrysler Pt Cruiser (2000-2010 / MK 1) In this video tutorial, you will see the main steps to remove the water pump from a Chrysler PT Cruiser. Start by removing the front right wheel and …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos