Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Front Bumper Removal Instructions

Model: Chrysler 300c MK 1 - Years 2004-2011
Part: Front bumper

First, remove the pressure clips securing the wheel arches and unscrew the fixing pins of the bumper located at the inner edge. Continue by removing the pins along the lower edge, unclip the bumper at the wings, and pull it forward to remove it from its seat. Then disconnect the connectors and remove all elements to be fitted to the new bumper, such as fog lights, grille, and internal reinforcement. Proceed in reverse for installation, first attaching it laterally under the wings and continuing with the fixing screws.

Updated on 5 February 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Replace the Fog Light on a Chrysler 300c
How to Replace the Fog Light on a Chrysler 300c
Chrysler 300c (2004-2011 / MK 1) First, release the bonnet from the designated lever, then lift it to access each headlight. Remove the clips securing the inner wing panel on the fro…
Installation of LED Fog Lights
Chrysler 300c (2004-2011 / MK 1) To remove the original fog lights, first detach the front bumper by releasing the clips at the wheel arches and other fastening screws. Proceed to re…
Removing the Starter Motor on Chrysler 300c 3.5L
Removing the Starter Motor on Chrysler 300c 3.5L
Chrysler 300c (2004-2011 / MK 1) In this video tutorial, you will see the instructions to remove and replace the starter motor on a first-generation Chrysler 300c with a 3,500 cc eng…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos