Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Installation of Brake Discs

Model: Chrysler Grand Voyager MK 4 - Years 2001-2007
Part: Brake rotors

To change the brake discs, you need to remove the caliper. The caliper can be fixed or sliding. When it is fixed, completely remove the two securing bolts to free the disc, allowing you to remove the caliper without necessarily disconnecting the brake hose. Once this operation is complete, you can remove the brake disc. Next, remove the securing devices located at the centre of the disc, and then take the disc off the hub. Before proceeding to the reassembly phase, clean the hub of all debris, after which you can install the new disc and all its accessories.

Updated on 10 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Resurfacing/Turning Brake Discs
Resurfacing/Turning Brake Discs
BMW Serie 3 (1998-2006 / E46) If you feel the steering wheel vibrating during braking, it is likely that the brake discs have become slightly warped: if they are not excessively w…
Removal and Replacement of Brake Discs
Removal and Replacement of Brake Discs
Porsche 911 (1997-2005 / 996) This video shows us how to remove and replace the brake discs on our car. First, lift the car using a lift and remove the wheels to access the brake …
How and when to replace the front brake discs of the Audi A4
How and when to replace the front brake discs of the Audi A4
Audi A4 (2014-2024 / B9) The instructions provided in this guide will show us how to disassemble and replace the front brake discs of the Audi A4; brake discs should be repla…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos