Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Problems with the immobilizer of the Citroen Nemo.

Model: Citroen Nemo MK 1 - Years 2007-2017
Part: Checks and maintenance

In this video we can see how to solve the problem of the immobilizer that blocks the fuel flow of our Citroen Nemo (but also Peugeot Bipper, Fiat Qubo, fiorino and Punto), even though we have the working original key. The youtuber recommends unscrewing five of the seven screws around the steering column, so that we can reach the immobilizer connector, which is located right under the ignition key lock. Clean the lock well with WD-40, especially the lower edge, which catches all the dirt. Once cleaned, the fuel will arrive normally, we can reconnect the immobilizer connector and close everything.

Posted on 7 December 2024 by ScegliAuto

Video tutorial

Related tutorials

Where is the fuse box of the Citroen Nemo located?
Where is the fuse box of the Citroen Nemo located?
Citroen Nemo (2007-2017 / MK 1) If you own a Citroen Nemo and want to find out where the box containing all the various fuses of the vehicle is located, then all you have to do is f…
How to remove the radio from the Citroën Nemo
How to remove the radio from the Citroën Nemo
Citroen Nemo (2007-2017 / MK 1) To remove the radio from the Citroën Nemo, insert the appropriate hook keys into the four holes located at the corners of the device. Once these keys…
How do you reset the Service light on the Citroën Nemo?
How do you reset the Service light on the Citroën Nemo?
Citroen Nemo (2007-2017 / MK 1) In order to reset the Service light of the Citroën Nemo, you need to connect a diagnostic tool to the OBD port of the vehicle: this port is located o…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos