Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the AdBlue light on the Citroën Jumper?

Model: Citroen Jumper MK 3 - Years 2014-2024
Part: AdBlue warning light

To reset the AdBlue warning light on the Citroën Jumper, you need to top up the additive fluid by adding the necessary amount of AdBlue to the corresponding tank. To locate the tank, you will need to open the fuel door located next to the driver's door: this way, you can remove the blue cap in the area below. Then you can add the necessary amount of fluid and close the tank: this way, you can verify that the warning light has completely disappeared.

Posted on 5 July 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the AdBlue light on the Citroën Jumper?
How do you reset the AdBlue light on the Citroën Jumper?
Citroen Jumper (2014-2024 / MK 3) The reset of the AdBlue light on the Citroën Jumper is done by performing a refill, by inserting the necessary amount of additional liquid into the s…
How to reset the AdBlue warning light on the Citroen Jumper
How to reset the AdBlue warning light on the Citroen Jumper
Citroen Jumper (2014-2024 / MK 3) In case the Adblue warning light comes on in this car model, we have provided simple instructions below on how to remove the signal. The Adblue light…
How to reset the service light of the Citroen Jumper
How to reset the service light of the Citroen Jumper
Citroen Jumper (2014-2024 / MK 3) To reset the service light related to the car service on a Citroen Jumper model mk3 vehicle, we need to turn on the vehicle's instrument panel withou…

    Frequently Asked Questions

    • Jumper 2014-2024 - What to do when the Adblue light comes on on your Citroen Jumper? Read answer
    • Jumper 2014-2024 - Why did the AdBlue warning light come on in the Citroen Jumper van? Read answer

How to Remove the Gear Knob on an Opel Astra

How to replace the gear knob on an Opel Astra? Follow these steps: use a plastic lever to disconnect the leather gaiter frame (if you need to replace it). Grip the knob with both hands and pull it upwards (with a strong and decisive motion) until it comes off the gear stick. For installation: fit the new gaiter and position it on the centre tunnel, take the new knob and push it onto the stick, tightening it until fully threaded. Test the movement of the stick on the centre tunnel to ensure the knob is correctly fitted.

Watch the video!


by ScegliAuto

More videos