Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the AdBlue Warning Light on the Citroen Jumper

Model: Citroen Jumper MK 3 - Years 2014-2024
Part: AdBlue warning light

If the AdBlue warning light illuminates on this vehicle model, the following description provides simple steps to remove the warning. The illuminated AdBlue light simply indicates that you need to top up the additive above the minimum level. Therefore, you need to purchase a canister of additive and use the supplied tube to fill the tank marked with a blue cap. After filling the tank, turn the ignition back on and the warning light will have turned off.

Updated on 31 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the AdBlue Warning Light on a Citroën Jumper?
How to Reset the AdBlue Warning Light on a Citroën Jumper?
Citroen Jumper (2014-2024 / MK 3) To reset the AdBlue warning light on a Citroën Jumper, you need to top up the system with the necessary amount of additive fluid. To do this, open th…
What Does the AdBlue Warning Light Indicate on the 2023 Citroën Jumper?
What Does the AdBlue Warning Light Indicate on the 2023 Citroën Jumper?
Citroen Jumper (2014-2024 / MK 3) AdBlue fluid is used in vehicles to reduce harmful and polluting nitrogen oxide emissions from combustion. Given the requirement for its use in diese…
How do you reset the AdBlue light on the Citroën Jumper?
How do you reset the AdBlue light on the Citroën Jumper?
Citroen Jumper (2014-2024 / MK 3) To reset the AdBlue warning light on the Citroën Jumper, you need to top up the additive fluid by adding the necessary amount of AdBlue to the corres…

How to replace the horn on a Renault Duster - Dacia Duster

Today's main instructions will show you the procedure for removing and replacing the horn or sound signal on the Renault Duster, as well as the Dacia Duster. First, open the bonnet of the vehicle and start removing the front bumper by unscrewing all the fixing screws; you will find the horn right in front of the radiator, as shown in the video. At this point, disconnect the electrical connector and unscrew the bracket screw to remove and replace the horn with the new one; finally, reassemble the front bumper!

Watch the video!


by ScegliAuto

More videos