Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

What does the illuminated tire warning light on the Citroen Jumper indicate?

Model: Citroen Jumper MK 2 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Tire pressure warning light

See other generations:
Video tutorial

The tire warning light on the dashboard of the Citroen Jumper indicates that it is necessary to check the tire pressure. To check the warning light, it is necessary to inspect the tire sensors located behind the tires.

The tire pressure must be as indicated by the manufacturer, so before resetting the warning light, it is necessary to use a pressure gauge and an air compressor to inflate the tires according to the instructions. The correct values are shown on a label located on the driver's side front door.

After inflating the tires, we can reset the warning light using the buttons on the steering wheel and the dashboard.


Posted on 18 January 2026 by ScegliAuto


Related tutorials

How do you reset the tire pressure warning light on the Citroën Jumper?
How do you reset the tire pressure warning light on the Citroën Jumper?
Citroen Jumper (2014-2024 / MK 3) In order to reset the tire pressure warning light on the Citroën Jumper, you need to inflate the tires until they reach the recommended pressure valu…
How to Reset the Tyre Pressure Sensor of the Citroen Jumper
How to Reset the Tyre Pressure Sensor of the Citroen Jumper
Citroen Jumper (2014-2024 / MK 3) In this brief guide, follow the instructions to reset and recalibrate the TPMS sensor of the Citroen Jumper, as well as the Fiat Ducato and Peugeot B…
How to reset the service light on the Citroen Jumper 2.2 HDI
How to reset the service light on the Citroen Jumper 2.2 HDI
Citroen Jumper (2006-2014 / MK 2) These short and simple steps will illustrate the process of resetting the service light for the regular maintenance of the engine oil change of the C…

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos