Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Sensor of the Citroen Jumper

Model: Citroen Jumper MK 3 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Tire pressure warning light

See other generations:
Video tutorial

In this brief guide, follow the instructions to reset and recalibrate the TPMS sensor of the Citroen Jumper, as well as the Fiat Ducato and Peugeot Boxer. Before performing the reset, ensure all four tyres are at the correct operating pressure, as indicated on the side label; then use the appropriate tool to calibrate the TPMS sensor, as shown in the video.

At this point, get inside the vehicle and turn on the ignition, ensuring that the TPMS warning light has reset!


Updated on 16 October 2026 by ScegliAuto


Related tutorials

How to Reset the Tyre Pressure Warning Light on the Citroën Jumper
How to Reset the Tyre Pressure Warning Light on the Citroën Jumper
Citroen Jumper (2006-2014 / MK 2) To reset the tyre pressure warning light on the Citroën Jumper, inflate the tyres to the correct pressure value: this value is indicated on the stick…
Where is the MAP Sensor on the Citroen Jumper 2.2 HDi?
Where is the MAP Sensor on the Citroen Jumper 2.2 HDi?
Citroen Jumper (2014-2024 / MK 3) In this video, see the exact location of the MAP sensor in the engine of a Citroen Jumper 2.2 HDi: MAP stands for Manifold Absolute Pressure, so the …
How to Reset the TPMS Light on the 2024 Citroen Jumper
How to Reset the TPMS Light on the 2024 Citroen Jumper
Citroen Jumper (2014-2024 / MK 3) Resetting the TPMS light related to tyre pressure is a simple and quick operation on a 2024 Citroen Jumper. To perform this operation, turn on the ve…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos