Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. Jumper
    4. : Where is the MAP sensor located on the Citroen Jumper 2.2 HDi?

Citroen Jumper - Video tutorial

Model: Citroen Jumper MK 3 - Years 2014-2023
Part: Engine
Operation: Where is the MAP sensor located on the Citroen Jumper 2.2 HDi?

In this video, we see the exact location of the MAP sensor in the engine of a Citroen Jumper 2.2 HDi. MAP stands for Manifold Absolute Pressure, so the sensor measures the mass of air drawn into the engine without load. At high engine loads, however, it is the throttle angle (through the potentiometer) that defines the value of the air mass. In turbocharged engines, the MAP also serves to control the turbocharger and is referred to as a boost pressure sensor. In our Jumper, we can see it very well in the engine compartment, just behind the radiator and under the air duct, in an easily accessible area, as the YouTuber demonstrates.


Posted on 21 June 2023 by ScegliAuto

How to replace the Ford Transit key battery

Below I will explain how to replace the remote control key battery on the car, take a small screwdriver and pry the rear part of the remote control, (where there is the ring), at which point unhook the back cover and yes will have access to the compartment containing the battery. Always with the help of the small screwdriver, proceed to make the va and lift the battery out of the housing. Then take the new battery (check the type) and place it on the housing, always making sure to position it with the positive pole facing upwards. Finally, close the back cover by re-hooking it to the key.

Watch the video!


by ScegliAuto

More videos