Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light on the Citroen Jumper 2.2 HDI

Model: Citroen Jumper MK 2 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Service warning light

See other generations:
Video tutorial

These short and simple steps will illustrate the process of resetting the service light for the regular maintenance of the engine oil change of the Citroen Jumper 2.2 HDI, as well as the Peugeot Boxer and Fiat Ducato. First, we get on board the vehicle and start the instrument panel; then we press and hold the reset button located on the right side of the panel, until the "CFG" message appears, as shown in the video.

At this point, we release the button and press it again, thus resetting the maintenance key on the display of the panel!


Posted on 25 April 2025 by ScegliAuto


Related tutorials

Where is the MAP Sensor on the Citroen Jumper 2.2 HDi?
Where is the MAP Sensor on the Citroen Jumper 2.2 HDi?
Citroen Jumper (2014-2024 / MK 3) In this video, see the exact location of the MAP sensor in the engine of a Citroen Jumper 2.2 HDi: MAP stands for Manifold Absolute Pressure, so the …
How to Reset the Service Light on the Citroen Jumper?
How to Reset the Service Light on the Citroen Jumper?
Citroen Jumper (2014-2024 / MK 3) Resetting the service light on the Citroen Jumper is easy and can be done in just a few minutes without needing to visit a mechanic. If you want to k…
How to Reset the Service Light in the Citroen Jumper Van?
How to Reset the Service Light in the Citroen Jumper Van?
Citroen Jumper (2014-2024 / MK 3) In this tutorial, see how to reset the service light in the Citroen Jumper van, a very simple and quick operation to be carried out only after comple…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos