Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How is the key for the Citroen Jumper programmed?

Model: Citroen Jumper MK 2 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Key

See other generations:
Video tutorial

The method presented in the attached video is known and is mainly used by specialised centres for this type of work. What does it involve? Simply put, an interface is connected via cable to the OBD port of the vehicle, then configured with all the necessary information, such as the make of the car, model, engine type, etc. It connects to the ECU, reads the Master key code, and finally, the Slave key is inserted into the reader and coded, allowing it to function fully, including engine start, locking and unlocking the doors, and more.


Posted on 29 May 2026 by ScegliAuto


Related tutorials

Where are the fuses on board the Citroen Jumper 2?
Where are the fuses on board the Citroen Jumper 2?
Citroen Jumper (2006-2014 / MK 2) The fuses located on board the Citroen Jumper van model 2, which was produced between 2006 and 2014, are situated in a easily accessible position for…
Where to Find the OBD2 Port on a Citroen Jumper
Where to Find the OBD2 Port on a Citroen Jumper
Citroen Jumper (2006-2014 / MK 2) If you are curious about where to find the OBD2 port on your Citroen Jumper, simply read the following steps carefully and apply them. First, open th…
How to Replace the Key Battery of the Citroen Jumper
How to Replace the Key Battery of the Citroen Jumper
Citroen Jumper (2006-2014 / MK 2) In this guide for all Citroen Jumper owners, you will learn how to independently replace the battery of the smart key. First, locate the button on th…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos