Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the battery of the Citroen C3 car remote control

Model: Citroen C3 SX, SY - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Key

See other generations:
Video tutorial

Today we will explain how to replace the battery of the car remote on a Citroen C3 vehicle. To replace the battery, we need to insert a flat-head screwdriver into the upper slot of the remote control cover.

By pushing vertically, we remove the remote control cover and replace the battery. The battery model to use for this type of remote control is the CR 2032 3 Volt. After replacing the battery, we close the remote control cover and test its operation by standing near the vehicle.

If it does not work, it will be necessary to reprogram the remote control.


Posted on 8 September 2025 by ScegliAuto


Related tutorials

Citroen C3 (2016-2023 / SX, SY) The main cause of malfunctioning of a Citroen vehicle remote control is a worn-out battery. To replace the battery in a 2018 Citroen C3 remote contro…
Citroen C3 (2016-2023 / SX, SY) To replace the battery in the key of your Citroen C3 latest model by yourself, simply follow the steps outlined in this new guide dedicated to you. F…
Citroen C3 (2009-2016 / SC) The battery of the remote control for the Citroen C3 car needs to be replaced following a simple and quick procedure that can be done independently. …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

    Frequently Asked Questions

    • C3 2016-2023 - What does the wrench light on my Citroen C3 mean? Read answer

How to Reset the Tyre Pressure Light on the Hyundai i20

These brief instructions will show you how to reset the tyre pressure monitoring system (TPMS) light on the Hyundai i20. Before performing the reset, ensure that all four tyres are at the correct operating pressure. Then, get inside the cabin and turn on the ignition. Now, press and hold the TPMS reset button located on the left side of the driver's seat until the tyre pressure light resets on the instrument panel, as shown in the video. At this point, turn off the ignition and start the engine to complete the process!

Watch the video!


by ScegliAuto

More videos