Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Wiper Motor on a Citroen C1?

Model: Citroen C1 MK 1 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Checks and maintenance

See other generations:
Video tutorial

To replace the rear wiper motor on a Citroen C1, open the rear hatch and remove the inner panel by unclipping the clips with a plastic lever. Disconnect the electrical connector of the motor.

Outside, unscrew the nut that secures the wiper arm and remove it. Return inside and unscrew the mounting bolts of the motor, then pull it out of its housing. Insert the new motor in the same position and secure it with the bolts.

Reconnect the electrical connector, reattach the wiper arm by tightening the nut, and reposition the inner panel by pressing until the clips are securely engaged. Turn on the ignition and check the proper functioning of the wiper.


Posted on 8 November 2026 by ScegliAuto


Related tutorials

How to replace the rear windshield wiper of the Citroen C1
How to replace the rear windshield wiper of the Citroen C1
Citroen C1 (2014-2022 / MK 2) If the rear windshield wiper of your Citroen C1 second series is experiencing malfunctions or is damaged, then you must replace it with a new one. In…
Replacing the Wiper Blades on a Citroen C1
Replacing the Wiper Blades on a Citroen C1
Citroen C1 (2005-2014 / MK 1) In this video guide, you will learn how to dismantle and replace the windscreen wipers on a first-generation Citroen C1. Obtain the original replacem…
How to replace the front windshield wiper of the Citroen C1
How to replace the front windshield wiper of the Citroen C1
Citroen C1 (2005-2014 / MK 1) The procedure illustrated in this guide will show us how to disassemble and replace the front windshield wiper of the Citroen C1. First, let's move t…

    Frequently Asked Questions

    • C1 2014-2022 - Where is the fuel switch of a Citroen C1 located? Read answer

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos