Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement license plate lights on Citroen C3

Model: Citroen C3 FC, FN - Years 2002-2009
Part: License plate light

C3 license plate bulbs burnt out? Let's see how they change. With a screwdriver we remove the transparent spotlight of the license plate light placed in the tailgate of the car. Once the lighting spotlight has been removed, let's extract (with our hands) the light bulb inside. We assemble the new bulb / LED (same size and voltage), inserting it in the lamp holder, we go to reassemble the spotlight in the door sheet by pressing it until the clips automatically lock. After locking the transparent shell, we check if the lights work or not (we turn on the bulbs with the controls).

Posted on 27 April 2020 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Number Plate Bulb on Citroen C3
How to Replace the Number Plate Bulb on Citroen C3
Citroen C3 (2002-2009 / FC, FN) To replace the number plate bulb on a Citroen C3, use a screwdriver or plastic lever to remove the light cover (plastic housing) located in the rear …
How to replace the third brake light and license plate light bulb of a Citroen C3
How to replace the third brake light and license plate light bulb of a Citroen C3
Citroen C3 (2009-2016 / SC) As we can see, it is possible to change the third brake light and the license plate light at the same time on the Citroen C3. To remove the license p…
How to replace the license plate light bulbs on the Citroen C3.
How to replace the license plate light bulbs on the Citroen C3.
Citroen C3 (2009-2016 / SC) If we need to replace the license plate light bulbs on this car model and maybe replace them with an equivalent LED model, in the description below w…

Other guides you may be interested in

Replace Timing Belt on Citroen C5

How to replace the timing belt on a Citroen C5? Lift the car on a column lift or jack (if necessary, remove the front wheel using a screwdriver to detach the right wheel arch liner). Once these steps are completed, lift the bonnet, remove the engine soundproofing panel and the belt cover (plastic or metal). Use a suitable spanner to loosen the tensioner pulley and slide the belt off its seat. Use a socket to unscrew the tensioner pulley securing bolt, then remove the water pump as shown in the video. Fit the new water pump (previously removed), the tensioner, and the belt itself, tightening everything with the socket. Finally, refit the belt pulley cover.

Watch the video!


by ScegliAuto

More videos