Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Rear Bulbs on Citroen C4 Grand Picasso

Model: Citroen C4 Picasso MK 2 - Years 2013-2022
Part: Tail light bulb

Open the boot lid, remove the now exposed rubber clip, and detach the vertical plastic next to the lamp unit. Unscrew the two screws securing the lamp bracket, and at this point, you can extract the headlamp from its housing and disconnect the connector. Once here, press the two side tabs and remove the rear cover, which contains the bulbs, and replace the affected bulb by simply unscrewing it (slightly) and pulling it out. For reassembly of the headlamp, proceed in reverse: connect the connector and screw the bracket back in after positioning it correctly.

Updated on 4 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Front Headlight Bulb on Citroen C4 Grand Picasso
Replacing Front Headlight Bulb on Citroen C4 Grand Picasso
Citroen C4 Picasso (2006-2013 / MK 1) Are the headlight bulbs on the C4 Grand Picasso blown? Let's see how to change them from the front headlight. Open the front bonnet by pulling the le…
Replacement of the rear shock absorber of the Citroen C4 Grand Picasso
Replacement of the rear shock absorber of the Citroen C4 Grand Picasso
Citroen C4 Picasso (2006-2013 / MK 1) The following steps will illustrate the process of disassembling and replacing the rear suspension of the Citroen C4 Picasso and C4 Grand Picasso. Fi…
How to disassemble the front headlight of the Citroen C4 Grand Picasso
How to disassemble the front headlight of the Citroen C4 Grand Picasso
Citroen C4 Picasso (2006-2013 / MK 1) Below we will see the instructions that will allow us to disassemble and replace the front headlight of the Citroen C4 Grand Picasso. First, we open …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos