Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the front headlight of the Citroen C4 Grand Picasso

Model: Citroen C4 Picasso MK 1 - Years 2006-2013
Part: Headlight

Below we will see the instructions that will allow us to disassemble and replace the front headlight of the Citroen C4 Grand Picasso. First, we open the hood of the car and start removing the upper plastic panel of the bumper, removing the clips and unscrewing the fixing screws; then we unscrew the screws of the headlight assembly and disconnect the electrical connector of the bulbs found on the back, as shown in the video. At this point, we replace the bulbs or the entire front headlight, making the electrical connection and fixing it to the body.

Posted on 7 September 2025 by ScegliAuto

Video tutorial

Related tutorials

Replacing Front Headlight Bulb on Citroen C4 Grand Picasso
Replacing Front Headlight Bulb on Citroen C4 Grand Picasso
Citroen C4 Picasso (2006-2013 / MK 1) Are the headlight bulbs on the C4 Grand Picasso blown? Let's see how to change them from the front headlight. Open the front bonnet by pulling the le…
How to replace the front fog light bulb of the Citroen C4 Grand Picasso
How to replace the front fog light bulb of the Citroen C4 Grand Picasso
Citroen C4 Picasso (2013-2022 / MK 2) These brief steps will show us how to disassemble and replace the front fog light bulb of the Citroen C4 Picasso and C4 Grand Picasso. First, let's m…
Replacing the Xenon Dipped Beam Bulb on the Citroen C4 Grand Picasso
Replacing the Xenon Dipped Beam Bulb on the Citroen C4 Grand Picasso
Citroen C4 Picasso (2013-2022 / MK 2) In today's tutorial video, you will learn how to remove and replace the dipped beam xenon bulb in the front headlamp of the Citroen C4 Grand Picasso.…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos