Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Fix the Passenger Side Flooding Issue on a Citroen C4 Picasso

Model: Citroen C4 Picasso MK 1 - Years 2006-2013
Part: Body

In this video, you will learn how to resolve the issue that has occurred on this Citroen C4 Picasso, where water has entered through the window and accumulated in the passenger compartment due to a blocked drain valve. But where is the drainage hole on this vehicle? It is actually located in a spot that is very likely to get blocked by dirt, as it is situated in the front wheel arch. You need to remove the wheel, detach the wheel arch liner as much as possible to access the valve shown in the video, take it out, and clean it while the water drains away.

Updated on 20 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to repair the air actuator of the Citroen C4 Picasso
How to repair the air actuator of the Citroen C4 Picasso
Citroen C4 Picasso (2006-2013 / MK 1) When the actuator of the Citroen C4 breaks down, it is necessary to replace it to restore the correct functioning of the air conditioning. But what p…
How to adjust the air conditioning of the passenger in the Citroen C4 Picasso
How to adjust the air conditioning of the passenger in the Citroen C4 Picasso
Citroen C4 Picasso (2006-2013 / MK 1) On the 2007 Citroen C4 Picasso vehicles, it is possible to independently adjust the air conditioning for both the driver's side and the passenger's s…
How to reprogram the control unit of the automatic gearbox of the Citroen C4 Picasso
How to reprogram the control unit of the automatic gearbox of the Citroen C4 Picasso
Citroen C4 Picasso (2006-2013 / MK 1) Today we will see the instructions that will allow us to reprogram the control unit of the automatic gearbox of the Citroen C4 Picasso. In order to p…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos