Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to open the engine hood of a Citroen C4 Picasso?

Model: Citroen C4 Picasso MK 2 - Years 2013-2022
Part: Body

To open the hood of a Citroen C4 Picasso, start by sitting in the driver's seat and locate the hood release lever under the dashboard. Pull it towards you to unlock the hood. Once the hood is unlocked, go outside the car and find the hood safety latch, located under the front edge of the hood itself, near the Citroen logo. Lift the latch upwards, depending on the model, to further release the hood. Now you can lift the hood with your hands until it locks into the open position. Be sure to support the hood while working underneath it to avoid injury or damage to the car. Once maintenance or inspection operations are completed, carefully lower the hood and make sure it closes properly.

Posted on 4 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Open the Bonnet on the Citroen C4 Picasso?
How to Open the Bonnet on the Citroen C4 Picasso?
Citroen C4 Picasso (2013-2022 / MK 2) In this tutorial, you will see how to open the bonnet on the Citroen C4 Picasso, a very simple operation that follows the standard procedure for any …
Battery Replacement on Citroen C4 Grand Picasso
Battery Replacement on Citroen C4 Grand Picasso
Citroen C4 Picasso (2006-2013 / MK 1) Is the battery of the Citroen C4 Grand Picasso damaged? Here’s how to replace it. Open the car door and release the front bonnet; lift the bonnet. Re…
How to Open the Stuck Boot of the Citroen C4 Grand Picasso
How to Open the Stuck Boot of the Citroen C4 Grand Picasso
Citroen C4 Picasso (2006-2013 / MK 1) Briefly follow these instructions to manually open the stuck boot of the Citroen C4 Picasso and C4 Grand Picasso. First, open the rear door and recli…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos