Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Front Headlight Bulb on a Citroen C4 Picasso

Model: Citroen C4 Picasso MK 1 - Years 2006-2013
Part: Headlight

Let's see how to change the front headlight bulb on a Citroen C4 Picasso: first, remember that bulbs should never be touched with bare hands, as this significantly shortens their lifespan; use disposable gloves to handle them. Access the front headlight by opening the bonnet and removing the rubber cap located over the bulbs. From here, you can remove the bulb of interest by turning it a quarter turn and pulling it out of its housing. Using the same method, insert the new bulb and then replace the rubber cap that protects the front light unit. The job is complete.

Updated on 5 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlamp Bulb on the Citroen C4 Picasso
Citroen C4 Picasso (2006-2013 / MK 1) In this short guide, you will see how to remove and replace the dipped beam bulb in the front headlamp of the Citroen C4 Picasso. First, open the bon…
How to replace the front headlight bulb of the Citroen C4 Picasso
How to replace the front headlight bulb of the Citroen C4 Picasso
Citroen C4 Picasso (2013-2022 / MK 2) Below we will describe all the steps necessary to complete the replacement of the front headlight bulb of your Citroen C4 Picasso quickly and safely.…
How to replace the front headlight bulb of the Citroen C4 Picasso
How to replace the front headlight bulb of the Citroen C4 Picasso
Citroen C4 Picasso (2006-2013 / MK 1) If you want to replace the front headlight bulb of your first series Citroen C4 Picasso by yourself, just carefully read the following procedure and …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos