Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlamp Bulb on the Citroen C4 Picasso

Model: Citroen C4 Picasso MK 1 - Years 2006-2013
Part: Headlight bulb

In this short guide, you will see how to remove and replace the dipped beam bulb in the front headlamp of the Citroen C4 Picasso. First, open the bonnet and start by removing the plastic protective cap of the bulbs (in this case, the bulb is replaced with the headlamp removed); then disconnect the electrical connector of the light and proceed to unscrew the two fixing screws of the bulb using a Torx spanner, as illustrated in the video. At this point, replace the dipped beam bulb with a new one that has the same type of fitting.

Updated on 10 May 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Replace the Front Headlamp Bulb on the Citroen C4 Picasso
How to Replace the Front Headlamp Bulb on the Citroen C4 Picasso
Citroen C4 Picasso (2013-2022 / MK 2) Replacing the front headlamp bulb on the Citroen C4 Picasso is a simple and quick task to carry out independently. Open the front bonnet and remove t…
How to Replace the Front Headlamp Bulb on a Citroen C4 Picasso
How to Replace the Front Headlamp Bulb on a Citroen C4 Picasso
Citroen C4 Picasso (2006-2013 / MK 1) To replace the front headlamp bulb on a first-generation Citroen C4 Picasso, switch off the engine and open the bonnet. Locate the rear of the affect…
How to replace the front headlight bulb of the Citroen C4 Picasso
How to replace the front headlight bulb of the Citroen C4 Picasso
Citroen C4 Picasso (2013-2022 / MK 2) Below we will describe all the steps necessary to complete the replacement of the front headlight bulb of your Citroen C4 Picasso quickly and safely.…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos