Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the rear shock absorber of the Citroen C4 Grand Picasso

Model: Citroen C4 Picasso MK 1 - Years 2006-2013
Part: Suspension system

The following steps will illustrate the process of disassembling and replacing the rear suspension of the Citroen C4 Picasso and C4 Grand Picasso. First, lift the vehicle and begin removing the plastic cover located under the suspension support; then compress the spring with a specific tool and unscrew the upper and lower part of the suspension, as shown in the video. At this point, replace and install the new suspension, reassembling all other components and the lower plastic cover, following the video tutorial until the end!

Posted on 5 September 2024 by ScegliAuto

Video tutorial

Related tutorials

Remove the Rear Shock Absorber from a Citroen C4 Picasso
Remove the Rear Shock Absorber from a Citroen C4 Picasso
Citroen C4 Picasso (2006-2013 / MK 1) To remove the rear shock absorber from a Citroen C4 Picasso, loosen the wheel nuts using a suitable tool (socket wrench or air drill), lift the car o…
Removing and Replacing the Radio on a Citroen C4 Grand Picasso
Removing and Replacing the Radio on a Citroen C4 Grand Picasso
Citroen C4 Picasso (2013-2022 / MK 2) In this brief guide, you will find instructions to remove and replace the radio and the standard multimedia system of the Citroen C4 Grand Picasso. F…
How to Repair the Glove Compartment of the Citroen C4 Grand Picasso
How to Repair the Glove Compartment of the Citroen C4 Grand Picasso
Citroen C4 Picasso (2006-2013 / MK 1) In this short and simple guide, you will see the main steps to repair the glove compartment of the Citroen C4 Grand Picasso, as well as the C4 Picass…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos