Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Antenna on a Fiat Bravo

Model: Fiat Bravo Bravo 2 - Years 2007-2014
Part: Antenna

Video tutorial
Detailed instructions - In this tutorial, you will learn how to remove and replace the radio antenna on a Fiat Bravo in a few simple steps. First, unscrew the old antenna to remove it from the base; if you want to install a new fin-shaped antenna, you may choose not to remove the base (as long as the fin fits perfectly over the antenna base). Typically, double-sided tape is used to secure it, which is usually included in the kit; if you wish to remove the antenna base, you will need to take off the headlining from the area near the bonnet to access the base's fixing screw and the electrical connector.

Updated on 1 May 2026 by ScegliAuto


Related tutorials

How to Replace the Antenna and Its Base on the Fiat Bravo
How to Replace the Antenna and Its Base on the Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) In this guide, you will find the instructions to remove and replace the antenna and its base on the Fiat Bravo. First, open the rear hatch of the boo…
How to Remove the Radio from a Fiat Bravo
How to Remove the Radio from a Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) How to replace the damaged stereo in a Fiat Bravo? Here’s how to remove it. Use the original metal keys to remove the stereo from the Fiat Bravo. Ins…
How to Remove the Radio from a Fiat Bravo
How to Remove the Radio from a Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) How do you remove the radio from the dashboard of a Fiat Bravo? Let's look at the disassembly of the parts. Use the original or aftermarket metal key…

Resetting the Tyre Pressure Warning Light on the Hyundai I20

The following instructions will show you how to reset the tyre pressure warning light on the Hyundai I20; before performing the reset, ensure that all four tyres are at the correct operating pressure. Then, get in the vehicle and turn on the ignition; press and hold the TPMS button located on the controls to the left of the steering wheel, as well as on the dashboard, as shown in the video. If the tyre pressures are correct, the warning light will automatically reset on the instrument panel; finally, turn off the ignition and start the engine!

Watch the video!


by ScegliAuto

More videos