Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Bravo
    4. : How to replace the brake light bulb on the Bravo

Fiat Bravo - Video tutorial

Model: Fiat Bravo Bravo 2 - Years 2007-2014
Part: Third brake light
Operation: How to replace the brake light bulb on the Bravo

Do we want to replace the third stop spotlight or the bulbs / LEDs? We remove the spotlight from inside the tailgate to replace it. Let's see the disassembly of the spotlight on Bravo. We pry between the bodywork and the spotlight until it comes off. As soon as the spotlight is free from any constraint, we can detach it from the spoiler (disconnect the relative power supply terminals). We insert the spotlight in the tailgate (after having mounted the bulbs) and screw the tightening pins of the same. Finally, we test the correct functioning of the lights: we turn on the instrument panel and operate the ignition control levers.


Posted on 23 December 2023 by ScegliAuto



Fiat Bravo headlight bulb replacement
Fiat Bravo (2007-2014 / Bravo 2) Let's see in this guide the main steps that will allow us to remove the headlight bulb of the Fiat Bravo, replacing it with a led type. In this case
How to replace the front position light bulb on Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) Today we will see, in this video tutorial, how to remove and replace the front position light bulb or the day light of the Fiat Bravo. First we open
How to replace the side indicator on a Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) Using a thin but resistant plastic tool and leveraging, let's start by disengaging the indicator light of our Fiat Bravo. Once this is done, we will

    Frequently Asked Questions

    • Bravo 2007-2014 - How much does the third stop of a Fiat Bravo cost? Read Answer

How to set the clock on the Yamaha Xmax 300

To change the time of the Yamaha Xmax 300, keep the "trip" button pressed, at the same time turn the ignition to "on"; release the "trip" button when the time starts flashing; briefly press the "trip" button to set the time; press and hold for a few seconds to confirm and move on to the minutes; briefly press the same button to set the minutes; we long press the same "trip" button to confirm; at this point in the meantime that we hold down the minutes stop flashing the time has been saved correctly and we can turn off the instrument panel.

Watch the video!


by ScegliAuto

More videos