Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Third Brake Light of a Fiat Bravo

Model: Fiat Bravo Bravo 2 - Years 2007-2014
Part:

Watch this video to learn how to remove the third brake light of a Fiat Bravo. First, remove the plastic cover using a screwdriver (located at the back of the boot), then unscrew the screws inside. Once the light is free from any constraints, disconnect it from the spoiler by detaching the relevant power connectors. Now, refit the new light: connect the power connector, insert the light into the boot (after fitting the bulbs), and screw in the securing pins. Test the lights to ensure they are functioning correctly.

Updated on 13 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Brake Pads on a Fiat Bravo 2 (198)?
How to Change the Brake Pads on a Fiat Bravo 2 (198)?
Fiat Bravo (2007-2014 / Bravo 2) In this video tutorial, see how to change the rear brake pads on a Fiat Bravo 2. First, lift the car and remove the wheel. Once done, unscrew the two…
How to Replace the Front Brake Pads of the Fiat Bravo
How to Replace the Front Brake Pads of the Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) In this tutorial, learn how to remove and replace the front brake pads of the Fiat Bravo in simple and quick steps. First, lift the vehicle and remov…
How to replace the rear brake pads on the Fiat Bravo?
How to replace the rear brake pads on the Fiat Bravo?
Fiat Bravo (2007-2014 / Bravo 2) In this tutorial, you will see how to replace the rear brake pads on the Fiat Bravo. First, open the bonnet and unscrew the cap of the brake fluid re…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos