Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Light on a Fiat Bravo

Model: Fiat Bravo Bravo 2 - Years 2007-2014
Part: Tail light

Want to remove the rear light on your Fiat Bravo? Let’s see how to proceed with the disassembly in this video. Open the boot lid, unscrew the screws located at the side of the light with a screwdriver, remove the piece and disconnect the power connector. Replace the bulbs if they are damaged, then prepare to reassemble the light. Connect the power connector and secure the light in the metal body using the appropriate plastic guides. Finally, tighten the screws in the designated slots on the side of the light. Test the correct operation of the lights.

Updated on 25 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Light of a Fiat Bravo
How to Remove the Rear Light of a Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) Before you can start, open the boot of your Fiat Bravo. This will expose the screws that secure the rear light to the car. Begin by unscrewing and re…
How to Dismantle the Rear Light of the Fiat Bravo 2
How to Dismantle the Rear Light of the Fiat Bravo 2
Fiat Bravo (2007-2014 / Bravo 2) Learn how to dismantle and replace the rear light and the bulbs inside the second series Fiat Bravo. First, open the boot lid and start by undoing th…
How to Replace the Rear Light Bulb on a Fiat Bravo
How to Replace the Rear Light Bulb on a Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) To replace the rear light bulb on a Fiat Bravo, lift the boot lid to access the screws located next to the light. By unscrewing these screws, you can…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos