Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Dismantle the Rear Light of the Fiat Bravo 2

Model: Fiat Bravo Bravo 2 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Tail light

See other generations:
Video tutorial

Learn how to dismantle and replace the rear light and the bulbs inside the second series Fiat Bravo. First, open the boot lid and start by undoing the side screws of the light unit using a socket spanner or a cross-head screwdriver; then disconnect the electrical connectors of the bulbs at the back, as shown in the video.

At this point, you can replace any faulty bulbs in the bulb holder; insert them correctly and refit the rear light onto the vehicle!


Updated on 6 June 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Light of a Fiat Bravo
How to Remove the Rear Light of a Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) Before you can start, open the boot of your Fiat Bravo. This will expose the screws that secure the rear light to the car. Begin by unscrewing and re…
How to Remove the Third Brake Light of a Fiat Bravo
How to Remove the Third Brake Light of a Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) Watch this video to learn how to remove the third brake light of a Fiat Bravo. First, remove the plastic cover using a screwdriver (located at the ba…
How to remove the gear knob of the Fiat Bravo
How to remove the gear knob of the Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) To disassemble the gear knob located inside the cabin of your Fiat Bravo correctly and safely, you must follow all the steps described in our new gui…

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos